NILMA PIONEER SYSTEM automatic potato peeling line at work
Photo from the manufacturer’s materials

Nilma S.p.A. · Italy

Automatic potato peeling line NILMA PIONEER SYSTEM

When a single peeler is no longer enough — washing, peeling and delivery to finishing in one line

  • 600 / 1200 kg/houtput
  • 250 kgloading hopper
  • 2.7 / 4.2 kWpower
  • 200 ltrolley capacity

Supply · installation and commissioning · staff training · service across Ukraine

The equipment in brief

A continuous line for large volumes of potatoes: one line washes, peels and delivers the potatoes for finishing. It is meant for large kitchens, catering plants and ready-meal workshops — where a single peeler is no longer enough.

Manufacturer photos

Photos from the manufacturer’s materials.

Key advantages

Three operations in one line

Washing, peeling and delivery to the finishing table — with no transfer of the product between machines.

Doubling without a new line

The double-direction version gives 1200 kg/h instead of 600 — the growth is designed in.

A 250 kg hopper

The operator loads less often and does not stand at the machine all shift.

It takes the skin, not a layer of flesh

The difference shows in the before-and-after photos — over tonnes of raw material it becomes tangible.

Continuous operation

The line does not work in cycles — potatoes flow through it rather than arriving in batches.

Ready for connection

Water to the elevator, to the peeler and to the finishing table, plus compressed air — every service is listed in the data sheet.

Who this equipment is for

The line is meant for large kitchens and workshops where potatoes arrive by the tonne:

How it works

  1. LoadingPotatoes are tipped into the 250 kg hopper.
  2. WashingThe elevator carries the product through the washing zone.
  3. PeelingThe abrasive section removes the skin continuously.
  4. FinishingThe peeled potatoes are delivered to the finishing table.
  5. DischargeThe finished product goes into a 200 l trolley.

Composition of the line

Technical data

ParameterValue
Capacitysingle-direction — 600 kg/h · double-direction — 1200 kg/h
Power supply3~230/400 V 50 Hz + PE
Installed power2.7 kW · 4.2 kW
Water for the elevatorinlet 3/4" · drain 2"
Water for the peelerinlet 1/2" (double-direction — 2 × 1/2") · drain 2" (double-direction — 2 × 2")
Water for the finishing tableinlet 3/4" · drain 1 1/2"
Compressed airinlet 1/4"
Loading hopper capacity250 kg of potatoes
Trolley capacity200 l
MaterialAISI 304 stainless steel throughout the line

Why customers buy from us

Nilma S.p.A. builds the machine. We are responsible for making it work on your product in your workshop — and for keeping it working. That is eight steps, and all of them are ours:

  1. Selection for your product
  2. Delivery
  3. Installation
  4. Commissioning
  5. Staff training
  6. Warranty
  7. Service
  8. Spare parts

Delivery

We bring the equipment to your plant.

Installation

Positioning in the production room, setting up and connection.

Commissioning

Testing and bringing the machine up to regime on your own product.

Staff training

We train your operators and technologists to run the equipment.

Spare parts

Supply of original components from the manufacturer.

Warranty and service

Warranty and post-warranty service across Ukraine.

Supplier in Ukraine: EURO CLASS TECHNOLOGY LLC, 27 Vadyma Hetmana St., Kyiv 03056 · tel. +38 044 225 93 72, +38 067 566 0 566 · kyuri@ec-cibo.kiev.ua

Not sure which configuration you need?

The version of the line depends on the volume. Tell us:

  • how many potatoes per shift;
  • whether finishing is needed;
  • which water services are already in place;
  • the length of the free floor section in the workshop.

Our engineer will propose the right configuration and prepare a quotation.

Prefer to talk? Call +38 067 566 0 566 or write to kyuri@ec-cibo.kiev.ua

We reply within one working day.

Other preparation and cooking equipment

← All items in this section