Made in Ukraine
Conveyor for folding and rolling crêpes
Two modes on one conveyor — folding into an envelope or rolling into a tube
- 3600 mmoverall length
- 2rows of 125 mm
- 150–200 mmpancake diameter
- 0.75 kWpower
Supply · installation and commissioning · staff training · service across Ukraine
The equipment in brief
A system for transferring and processing crêpes: folding into an envelope or rolling into a tube. A three-section two-row conveyor with knife-edge belt transfer both at the discharge and at the loading end. Folding is performed by sets of turning hooks and pressure rollers (envelope) or by a net (tube), mounted on the central section.
Key advantages
Two modes on one machine
Envelope or tube — the attachment changes, not the conveyor.
Made in Ukraine
A shorter lead time, simpler service and spare parts without importing.
Dimensions to order
The standard 3600 mm is adjusted to your workshop — the length is not fixed.
Knife-edge turn at both ends
The belt turns at both loading and discharge — the conveyor fits into a line from either side.
Adjustable height
900–1000 mm from the floor — it mates with the neighbouring equipment without packing pieces.
Strips down for washing
An open structure, removable attachments and a belt to FDA/EU standards.
Who this equipment is for
The conveyor completes a pancake line where the folding is still done by hand:
- plants with pancake lines
- frozen semi-finished product workshops
- central kitchens
- plants assembling a line from separate units
How it works
- Pancake infeedPancakes arrive on the two-row belt, 125 mm per row.
- Work on the central sectionFolding hooks with pressure rollers make the envelope; nets roll the tube.
- OutfeedThe finished products go to packing or freezing.
Composition and design
- Idle conveyor section 300 mm, hinged — belt tension is easily released for access and washing
- Central section 2000 mm with mounting points for six attachments
- Drive section 500 mm with a geared motor, a double independently adjustable area with knife-edge belt transfer
- Turning hooks (3 sets)
- Pressure rollers (3 sets)
- Net for rolling into a tube
- Stainless steel control panel
The frame and all parts in contact with the product are stainless steel or food-grade plastics. The polyurethane-coated belt complies with the requirements for conveying unpacked food under FDA 21CFR, EC 1935/2004 and EU 10/2011. Most attachments are easily removed for washing; the design is open, with a minimum of hidden surfaces. The drive is a geared motor with frequency control; operation from the panel or remotely from external automation systems.
Technical data
| Parameter | Value |
|---|---|
| Overall length | 3600 mm |
| Conveyor width | 680 mm (1000 mm with supports) |
| Belt height from the floor | 900–1000 mm (adjustable) |
| Belt row width | 125 mm · 2 rows |
| Crêpe diameter | 150–200 mm |
| Processing modes | folding into an envelope · rolling into a tube |
| Power | 0.75 kW · 380 V |
| Hygiene | open design, removable attachments, FDA/EU belt |
| Basic dimensions | adjusted to order |
Why customers buy from us
Made in Ukraine builds the machine. We are responsible for making it work on your product in your workshop — and for keeping it working. That is eight steps, and all of them are ours:
- Selection for your product
- Delivery
- Installation
- Commissioning
- Staff training
- Warranty
- Service
- Spare parts
Delivery
We bring the equipment to your plant.
Installation
Positioning in the production room, setting up and connection.
Commissioning
Testing and bringing the machine up to regime on your own product.
Staff training
We train your operators and technologists to run the equipment.
Spare parts
Supply of original components from the manufacturer.
Warranty and service
Warranty and post-warranty service across Ukraine.
Supplier in Ukraine: EURO CLASS TECHNOLOGY LLC, 27 Vadyma Hetmana St., Kyiv 03056 · tel. +38 044 225 93 72, +38 067 566 0 566 · kyuri@ec-cibo.kiev.ua
Not sure which configuration you need?
The conveyor is made to your dimensions. Tell us:
- the pancake diameter;
- the mode you need — envelope or tube;
- the length of the section it has to occupy;
- the height of the neighbouring equipment.
Our engineer will propose the right configuration and prepare a quotation.
Prefer to talk? Call +38 067 566 0 566 or write to kyuri@ec-cibo.kiev.ua
Other equipment in this section
Automatic filled pancake line — five folds
About 4,800 pcs/h · product 90 × 55 mm · 65–80 g.
Discs Ø2 mAutomatic round pancake line, Ø2 m discs
Two cast-iron discs · up to 3,410 pcs/h · two production rows.
BatterBALPE batter preparation and feeding system
Mixing, holding and automatic feeding — one or two lines.
Disc cleaningAutomatic baking disc carbon cleaning system
Discs Ø2 and Ø3 m · brush cleaning with a vacuum unit.